• <div id="1gyio"><ruby id="1gyio"><cite id="1gyio"></cite></ruby></div>
    1. <bdo id="1gyio"><dfn id="1gyio"></dfn></bdo>
      1. <bdo id="1gyio"><dfn id="1gyio"></dfn></bdo>

            在線留言| 聯系我們| 收藏本站 歡迎光臨無錫雙盛石化裝備有限公司官方網站!
            當前位置:行業新聞

            討論一下高壓反應釜受熱變形的起因

            發布日期:2019-09-19 04:37:31 訪問次數:741

            小易為你介紹一下高壓反應釜受熱變形的起因

             1.根據高壓反應釜的產品性能,反應器設備可以承受高溫。 基本上,沒有變形這樣的東西,但是不可能排除某些特殊情況。

              2.當高壓反應器設備在實際使用過程中使用時,當水質失效或水渣過多時,通常會引起反應器變形。

              3.在設計高壓反應器時,混合器的布局很差。 此時,該裝置可能無法在實際操作中長時間承受熱量并變形。

              通常,在高壓反應釜的操作中,加熱表面需要不時地使用水進行冷卻工作。 但是,當出現問題或冷卻工作停止時,設備可能會過熱并變形。

            英文:

            iaoyi will introduce the cause of thermal deformation of high-pressure reactor for you.


            1. According to the product performance of the autoclave, the reactor equipment can withstand high temperature. Basically, there is no such thing as deformation, but it is impossible to rule out some special cases.


            2. When the high-pressure reactor equipment is used in the actual process, when the water quality fails or excessive water slag, the reactor will usually be deformed.


            3. In the design of high-pressure reactor, the mixer layout is very poor. At this point, the device may not be able to withstand heat and deformation for a long time in actual operation.


            Usually, in the operation of high-pressure reactor, the heating surface needs to be cooled by water from time to time. However, when problems arise or cooling stops, the equipment may overheat and deform.

            聯系我們
            服務熱線

            180-1839-6999

            電話號碼0510-85182188

            企業郵箱wxsssh@163.com

            地址無錫市濱湖區胡埭工業園負來橋路10號

            鸿运彩票